5.1.4. Encryption keys
►
This page lets you enter the encryption key of the servers. These keys are used in
the NTP settings (see section 5.1.3. NTP settings).
5.1.5. Outputs settings
►
Use this page to set manually the time on the clock. The user can also choose whe-
ther the clock continues to run if it loses the time information.
►
The last parameter configures the time displayed on the clock relative to UTC time.
For example: For France, enter the last two fields as follows:
►
Offset from UTC : + 1 : 0
►
DST : European Union
48
MDE-HANDI-2078V2.2