Main Page; Snmp Parameters - Gorgy Timing HANDI 300 Bedienungsanleitung

5.1.1. Main page

► To display the main clock page, click on the "Standard" button. This page gives the main
information about the clock. We can read the serial number, the software version, etc.
► This page also allows us to configure the network parameters of the clock. The user
can choose an automatic setting or specify an IP address himself, a subnet mask and
default gateway.
► The user can also enter a password that will secure the access to the web interface.

5.1.2. SNMP parameters

Information specific to the SNMP protocol for the monitoring of the clock can be entered
on this page, and addresses on which alarms will be sent (traps).
46 MDE-HANDI-2078V2.2