2.2.4. DCF RECEIVER VERSION
►
Depending on the power supply option, connect the clock to the mains.
☛
The hands are positioned at 12 o'clock and then, 3 to 4 minutes after
receiving the code, are positioned according to the received time information.
☛
2.2.5. DHW (869 Mhz) RECEIVER VERSION
►
Change the switch position on the back onto the "ON" position.
☛
The hands are positioned at 12 o'clock and then, 2 to 3 minutes after
receiving the code, are positioned according to the received time information.
2.2.6. NTP RECEIVER VERSION
A. 230VAC version
►
Connect the clock to the computer network.
►
Connect the clock to the mains.
►
Change the switch position on the back onto the "ON" position.
B. POE version
►
Connect the clock to the POE injector.
►
Change the switch position on the back onto the "ON" position.
☛
The hands are positioned at 12 o'clock and then, 3 to 4 minutes
after receiving the code, are positioned according to the received time
MDE-HANDI-2078V2.2
To reset, open the clock and press the "reset" button once.
information. For the advanced configuration,
see section 5. WEB INTERFACE.
33