Setting Ventilation Levels; Program Structure, Menus - Maico WRG 35 Montage- Und Betriebsanleitung

6.2 Setting ventilation levels

In automatic mode, the ventilation unit runs
at the ventilation level programmed for the
corresponding time in the week program
(→ Chapter 6.6), or according to the humidity
sensor.
 Turn to the right until "Manual" is
displayed and the bar count or arrow
direction displays the required ventilation
level.
 Turn to the left until "Auto" is displayed
to switch into automatic mode.
The manually set ventilation level runs
i
until you rest it to automatic mode.
Sequence of the ventilation levels
Automatic mode and manual mode
Function
Ventilation
level
Off* Ventilation unit off
Level 1 Operation with heat
1 bar
recovery, 17 m³/h.
Level 2 Operation with heat
2 bar
recovery, 30 m³/h.
Level 3
Operation with heat
3 bar
recovery, 45 m³/h.
Level 4 Operation with heat
4 bar
recovery, 60 m³/h.
Only supply air Operation with ventilation
arrow inwards
level 1, 2, 3 or 4. Factory
setting level 2 / 30 m³/h.
Without heat recovery.
Exhaust air fan off.
Exhaust air shutter closed.
Only exhaust air Operation with ventilation
arrow outwards
level 1, 2, 3 or 4. Factory
setting level 2 / 30 m³/h.
Without heat recovery.
Supply air fan off.
Supply air shutter closed.
*
The off function can also be completely
deactivated so that the ventilation unit
runs permanently and also cannot be
switched off by persons who are not
authorised to do so (→ Service menu).

6.3 Program structure, Menus

Main menu
The starting image appears on the graphical
display.
 Press .
 Press until the required Main menu
item appears.
 Press .
Main menu
Activate Party operation.
Activate Standby operation
Week timer:
● Standard week program
● Individual week program
Vacation program
Sensor values: Only for
WRG 35H to query the
relative humidity values (r. h.).
Otherwise, no function.
Settings (→ Menu)
Exit
GB
→ Chapter 6.4
→ Chapter 6.5
→ Chapter 6.6
→ Chapter 6.7
→ Chapter 6.8
→ Chapter 6.9
43