Activate Party Operation; Activate Standby Operation; Week Timer - Maico WRG 35 Montage- Und Betriebsanleitung

6.4 Activate Party operation.

If you use party operation, you activate the
device for timed air extraction with a higher
ventilation level in power mode.
Timer function up to a max. 180 minutes
(→ Chapter 6.9). A ventilation level with heat
recovery or supply or exhaust air operation is
available.
 Select this function with
The current remaining time appears in the
display. When the timer reaches zero, the
system returns to the ventilation level
defined through the week program or that,
which had been set manually before.
 Press Deactivate, if you want to switch
off this function ahead of time.

6.5 Activate Standby operation

If you use standby operation, you activate the
device for timed quiet air extraction with a
lower ventilation level.
Timer function up to a max. 180 minutes
(→ Chapter 6.9). A ventilation level with heat
recovery or supply or exhaust air operation is
available.
 Select this function with
The current remaining time appears in the
display. When the timer reaches zero, the
system returns to the ventilation level
defined through the week program or that,
which had been set manually before.
 Press Deactivate, if you want to switch
off this function ahead of time.

6.6 Week timer

Here, you can select an existing week
program or save your own, individual week
program.
The ventilation unit(s) then run at the set
ventilation level during the programmed time
periods.
.
You get to the
Main menu. Here you now have the option to
load a
new individual week program.
Selecting the standard week program
 Select the week timer menu
 Press
 Press
 Select the required standard week program
 Confirm by pressing.
 Activate the program with
 Keep selecting Exit until the starting
image appears.
.
Automatic operation is switched off in
i
the factory setting; see standard week
program "WP6".
Week timer menu item in the
standard week program or to create a
. Load standard week program
appears.
twice. The "No change" field is
marked.
with .
WP1 LS1 LS2
Mo-Fr 00:00 - 6:30 -
06:30 11:00
21:00 - 13:30 -
24:00 21:00
Sa 00:00 - 8:30 -
08:30 12:00
23:00 - 14:00 -
24:00 23:00
Su 00:00 - 8:30 -
08:30 9:30
23:00 - 21:00 -
24:00 23:00
GB
item.
Exit.
LS3 LS4
11:00 -
13:30
12:00 -
14:00
9:30 -
21:00
45