Program Levels - Maico ECA 150 ipro Montage- Und Betriebsanleitung

2. .2 Wireless window contact 8
EnOcean switch, optional
A maximum of 2 wireless window contacts
can be set up on each ECA 150 ipro RC.. fan.
Each wireless window contact reports the
status 'Window open' or 'Window closed' to
the assigned fan.
When the window is opened the assigned fan
automatically switches off. The fan can
however be switched on with an assigned
radio switch (the radio switch has priority over
the RLS RC and/or wireless window contact).
After about 30 minutes the fan switches off
again (window open) or reverts to the mode
set on the RLS RC (window closed).
In RCH/KRCH units the automatic humidity
process has priority. The fan cannot be
operated with the RLS RC, DS RC or window
contact during humidity operation.
2.9 Program levels  Chapter 8
2. Product information │ uk
2.8.3 Room air control RLS RC
EnOcean radio control
For information about the RLS RC
control  separate installation
instructions.
● The room air control RLS RC is a radio
control for the manual operation of master
and slave devices. Two programs (P1/P2)
with different combinations of performance
levels are available for operation. The
program suitable for the application is
determined during the start-up ( table
in Chapter 9).
● The RLS RC display shows:
● System level 0 / Off (no bar)
● System level 1 (2 bars)
● System level 2 (4 bars)
● System level 3 (6 bars)
● The display also shows time and
temperature.
● The vacation mode is fitted with interval
operation. All fans alternate between on/off
at 30-minute-intervals (to prevent
humidity). Commands from other
participants on the network are ignored
until holiday mode is switched off.
● Service menu: For system settings.
21