Rls 4-1 Room Air Control; Rls 5 Room Air Control; Wrg 35 Network - Maico WRG 35 Montage- Und Betriebsanleitung

3.6 RLS 4-1 room air control

● Room air control in surface- or recessed-
mounted version (AP or UP).
● Manual selection of the ventilation levels.
● Off, 4 ventilation levels or pure supply air or
exhaust air operation can be selected with
▲ button or ▼ button.
● The shutters are closed when it is switched
off, so that no outside air can flow in.
● With filter change and fault display.

3.7 RLS 5 Room air control

● Room air control in surface- or recessed-
mounted version (AP or UP).
● With graphical display and user-friendly
menu guidance.
● Navigation with operating knob. Adjustment
by turning, confirmation by pressing.
● Automatic operation with individually
programmable week program. Ventilation
levels can also be selected manually.
● Off, 4 ventilation levels or supply air or
exhaust air operation can be selected.
● With filter change operating status and fault
display. With operating hours counter.
● Continuous operation function can be
activated. Ventilation level "off" completely
deactivated.
H versions
● With additional humidity control.
● For demand-driven air extraction in the
case of humidity (humidity setpoint value
and overrun time can be adjusted).
● Humidity alarm if relative humidity exceeds
80%.

3.8 WRG 35 Network

● UP to 9 WRG 35-1 and/or WRG 35H fan
units can be connected (1 master device
and 8 slave devices).
● Up to 4 RLS 4-1 or RLS 5 room air controls
can be connected.
● Only use the same room air control model.
RLS 4-1 and RLS 5 cannot be combined.
● Networking through the WRG 35-AAD
junction box.
● Connection with control cable WRG 35-TAK
5 (5 m long) or WRF 35-TAK 10 (10 m
long), ready-made.
● Permitted maximum overall cable length
is 50 m.
● All ventilation units can be operated from
each connected controller.
● Settings affect all connected ventilation
units.
GB
39