Attach The Shoulder Strap; Switching On And Off; Working With The Device; Putting Down The Device - FLORABEST FTHSA 20 B2 Originalbetriebsanleitung

G B I E N I

Attach the shoulder strap

The carrying strap (
equipped with a quick-acting
release mechanism so that
the device can be released
quickly from the carrying
strap in a dangerous situati-
on. To open the push-fit lock (
12a), press the two clamps
( 12b) together.
1. Put on the shoulder strap.
2. Attach the shoulder strap spring clip
( A 13) to the carrying eyelet (
the tubular shank of the device.
3. Set the strap length such that the
spring clip ( A
strap ( A 12) is roughly at the height of
your hip.

Switching On and Off

Ensure that you are standing in a
ping the hedge trimmer away from
the body. Ensure that the trimmer
is in contact with no other objects
before switching on.
A
( 10) depressed and simultaneously
press the on/off switch (
vice will be run at maximum speed.
2
when you release on/off switch (

Working with the device

During cutting work, ensure that no
contact is made with objects, e.g.
such as wire fencing or main plant
the cutter bar.
1 6
12) is
A
13) on the shoulder
A
• Check the shoulder strap (
pleasant position, which makes it easi-
er for you to hold the hedge trimmer.
• If the blades become jammed with
solid objects, turn the device off im-
mediately, take out the rechargeable
battery, and remove the object.
• Avoid overstraining the equipment dur-
ing work.

Putting down the device

• Place the device on the ground with
the motor housing (
9) on
placed on the ground without being
subjected to any pressure.
• Do not apply any static pressure what-
soever to the safety cutter bar (

Cutting Techniques

• Cut thick branches beforehand using a
branch clippers.
-
ting in both directions or, with a swing-
ing action, from one side to the other.
• In case of vertical cutting, move the
hedge trimmer uniformly forward or up
and down in an arc movement.
• In case of horizontal cutting, move
the hedge trimmer in a sickle-shaped
- movement to the edge of the hedge, so
that cut branches fall to the ground.
• In order to achieve long straight lines,
A
11). the placing of tensioned guiding cords
is recommended.
Cutting Shaped Hedges:
It is recommended that hedges be cut in
a trapezoidal shape, in order to prevent
responds to the natural plant growth and
allows the hedge to thrive optimally. During
A 12) on a
A 2
A 1) must be
A 1).
-
-