Trouble Shooting - FLORABEST FTHSA 20 B2 Originalbetriebsanleitung

Trouble Shooting

Problem
Device does not
start
Device works with
interruptions
Blade safety bar
(1) is getting hot
Bad cutting results
Charging not
possible (red LED
charger (15)
Charging not possi-
ble (red and green
charger (15)
Possible cause
Rechargeable battery (17)
discharged
Rechargeable battery (17)
not inserted
Switch lock (10) has not
been activated properly
On/off switch (11) is broken
Worn out carbon brushes
Defective motor
Internal loose contact
On/off switch (11) is broken
Blade safety bar (1) is blunt
Blade safety bar (1) contains
nicks
of lubrication
of lubrication
Dirty blade safety bar
Blade safety bar (1) is blunt
Bad cutting technique
Battery (17) too warm
Battery (17) defective
G B
Troubleshooting
Charge the rechargeable battery
(see 'Charging process')
Insert rechargeable battery (see
'Charging process')
Switch it on (see 'Operation')
Repair by service centre
Repair by service centre
Sharpen or replace blade safety
bar (1) (service centre)
Check or replace the blade safety
bar (1) (service centre)
Lubricate the blade safety bar (1)
Lubricate the blade safety bar (1)
Clean the blade safety bar (1)
Have the blade safety bar (1) shar-
pened or replaced (service centre)
See 'Working with the device'
Allow battery to cool
Replace battery (see 'Spare Parts/
Accessories')
N I
I E
2 1