Battery Change; A) Ir Remote Control; B) Outdoor Sensor For Temperature/Humidity - Conrad 67 28 64 Bedienungsanleitung

12. Battery Change

a) IR Remote Control

A battery change is required if the range between the IR remote control and the weather station drops or if the weather
station no longer responds to the IR remote control at all.
Proceed as described in chapter 9. a) for insertion of the battery.

b) Outdoor Sensor for Temperature/Humidity


If the weather station no longer receives any measured values, the measured data are only displayed as
dashes.
Replace the batteries in the outdoor sensor and proceed as described in chapter 9. b).
After starting the weather station, it may take up to 30 seconds until the values measured by the outdoor sensor (see
chapter 11. d), display area "D") appear.
45