Conrad 67 28 64 Bedienungsanleitung Seite 42

12. Submenu "Format"
In this submenu, the memory card or USB flash drive can be formatted.
If both storage devices are plugged in at once, the arrows " " and " " can be used to select the storage device you
want to format first.
Either push "ENTER" to confirm or "EXIT" to cancel on the IR remote control.
Then a safety prompt appears. Use the button "ENTER" to start formatting; use "EXIT" to return to the previous menu.
Attention!
When formatting, all data on the memory card or USB flash drive will be lost!
If you have any other data (e.g. movies, programmes, texts, etc.) on the memory card or the USB flash
drive, they will be deleted as well.
We therefore recommend only formatting the memory card or USB flash drive on a computer because you
can verify there which data are still on the memory card or USB flash drive.
13. Submenu "Default Setting"
If required, you can reset all settings to the default settings here.
14. Submenu "System Information"
After choosing this submenu, the firmware version number is displayed.
42