Maintenance Works - Kärcher BR 45/40 C Ep Handbuch

Yearly
Have the prescribed inspection carried
out by the customer service.

Maintenance Works

Replacing the vacuum lips
Remove the vacuum bar.
Unscrew the star grips.
Remove the plastic parts.
Remove the vacuum lips.
Insert new vacuum lips.
Insert the plastic parts.
Screw in and tighten the star grips.
Replacing the brush rollers
Empty the dirt water reservoir.
Press the appliance to the bottom using
the push handle.
Turn the running gear to the front with
your foot.
Press the brush change key and tilt the
cover on the brush head towards the
side.
Pull out the brush rollers.
Insert and lock into place the new brush
rollers.
Close the cover, align the brushes and
lock in the cover.
Turn the running gear to the back with
your foot.
Replacing the disk brushes
Empty the dirt water reservoir.
Press the appliance to the bottom using
the push handle.
Turn the running gear to the front with
your foot.
Turn the button for the setting of the ad-
vance speed in "– " direction.
Press the pedal for changing the brush-
es downward beyond its resistance.
Drive the appliance in reverse till the
disk brush is free.
Remove the disk brush and place the
new disk brush in front of the appliance.
Drive the appliance forward over the
disk brush.
Turn the running gear to the back with
your foot. The brush will lock into the
brush drive.
Set the advance speed.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
10
-
EN 23