Kärcher BR 45/40 C Ep Handbuch Seite 16

Please read and comply with
these instructions prior to the
initial operation of your appliance. Retain
these operating instructions for future refer-
ence or for subsequent possessors.
Contents
Safety instructions
Function
Proper use
Environmental protection
Operating elements
Before Commissioning
Operation
Maintenance and care
Faults
Specifications
Accessories
CE declaration
Warranty
Spare parts
Safety instructions
Before using the appliance for the first time,
read and observe these operating instruc-
tions and the accompanying brochure:
Safety information for brush cleaning units
and spray-extraction units, 5.956-251.
Safety Devices
Safety devices serve for the protection of
the user and must not be put out of opera-
tion or bypassed with respect to their func-
tion.
Control handle
To put the brush drive out of operation im-
mediately: release the control handle.
16
The following symbols are used in this op-
erating manual:
Indicates an immediate threat of danger.
Failure to observe the instruction may re-
sult in death or serious injuries.
EN - 3
Indicates a possibly dangerous situation.
EN - 3
Failure to observe the instruction may re-
EN - 4
sult in light injuries or damage to property.
Note
EN - 4
Indicates useful tips and important informa-
EN - 5
tion about the product.
EN - 6
EN - 7
The appliance is used for the wet cleaning
EN - 9
or polishing of level floors. It can be easily
EN - 11
adjusted to the cleaning task by setting a
EN - 12
cleaning program and the water quantity.
A working width of 450/550 mm and a ca-
EN - 14
pacity of 40 l each of the fresh and dirt wa-
EN - 14
ter reservoirs enable an effective cleaning.
EN - 14
The power supply operation allows a high
capacity without a restriction of the working
EN - 14
time.
Note
The appliance can be equipped with vari-
ous accessories depending on the cleaning
task. Please request our catalogue or visit
us on the Internet at www.kaercher.com.
3
-
EN
Symbols
Danger
Warning
Function