E) Bluetooth ® Operation - Renkforce 1574942 Bedienungsanleitung

Further operating options can be found in the menu
• Push the button MENU (5) to display the menu.
• The following menu items refer to FM operation.
Scan Setting
Audio Setting
e) Bluetooth
®
Before transmission between your Bluetooth
must be coupled. This process is called "pairing".
If you have already coupled to a Bluetooth
restored automatically when both devices are in range and Bluetooth
been selected on the radio. "Pairing" does not have to be repeated. This function may
need to be activated in your Bluetooth
• Push the MODE (2) button to display the selection menu for the different operating modes.
• Use the buttons
dial switch (11).
• Switch your Bluetooth
pairing mode here (see instructions of the corresponding device). The device scans for
Bluetooth devices in the reception range.
®
• When the radio was found, your Bluetooth
• Select the radio at your Bluetooth
• Start playback on your Bluetooth
• Playback now takes place using the radio.
• Push the buttons
• Push the dial switch (11) to interrupt or restart playback.
Specifies whether the station scan is to find only strong stations
or all stations.
Specifies whether audio is received in mono or stereo.
For weak stations, mono reception is recommended, since this
produces less noise.
operation
(9) or (10) to select the operating mode BLUETOOTH
device to which you want to connect the radio on and activate the
®
device.
®
device.
®
(9) or (10) buttons to jump one track forward or backward.
device and the radio is possible, both devices
®
device before, this connection will be
®
device, however.
®
device shows its name (RF-DAB-RETRO1).
®
operation has
®
and push the
®
37