Renkforce 1574942 Bedienungsanleitung Seite 27

• Consult an expert if you are unsure as to the function, safety or connection of
the product.
• Have maintenance, adjustment and repair work only performed by a specialist or
specialist workshop.
• In case you have questions which are not answered in these operating
instructions, contact our technical service or other specialists.
• Use only the enclosed mains adapter for power supply.
• To disconnect the device completely from the mains, the mains plug has to be
pulled out of the socket.
• The mains socket must be close to the device and easily accessible.
• Never touch the power unit with wet or damp hands. There is a risk of potentially
fatal electric shock!
• Make sure that the mains adapter connection cable is not jammed, bent or
damaged by sharp edges or otherwise mechanically stressed. Avoid excessive
thermal stress on the mains adapter cable from extreme heat or cold. Do not
modify the mains adapter. Otherwise the mains adapter may be damaged. A
damaged mains adapter can cause a deadly electric shock.
• Do not touch the mains adapter if it shows any damage. First, power down the
respective mains socket on all connections (e.g. via the respective circuit breaker
and FI switch) and then carefully pull the mains adapter from the mains socket.
Never use the product if the mains adapter is damaged.
• Never replace a damaged connection cable of the mains adapter. If the connection
cable is damaged, the mains adapter is unusable and must be disposed of. It must
not be repaired.
• All persons that operate this device, install, commission or service it must observe
these operating instructions.
• Make sure the device is sufficiently ventilated when in operation. Do not cover the
ventilation openings with magazines, blankets, curtains or similar.
• Do not place any open sources of fire, such as burning candles, on or directly
next to the device.
• Never operate the device unattended.
27