Setting The Pabx Code; Setting The Alarm - AUDIOLINE TEL136 Bedienungsanleitung

Settings
4 Press the Star key for switching the dialling method.
5 Press the Set key to confirm.

Setting the PABX code

This setting is only necessary, if your phone is connected to a PABX.
If you want to call back using an entry in the calls list (and the telephone
number consists of more than 6 digits), automatically the stored PABX
code followed by a 1 second pause is dialled ahead the telephone
number. The setting - means that no PABX code is set.
1 The receiver is placed on the base.
2 Press and hold the Delete key for approx 3 seconds.
3 The display shows PcodE- with the - flashing.
4 Set the digit for your PABX code using the Up key ▲ or the Down key
▼.
5 Press the Set key to confirm.

Setting the alarm

The alarm clock settings 1, 2 and 3 will be repeated periodically every
day while the alarm clock settings 4 and 5 are effected one time.
1 The receiver is placed on the base.
2 Press the Set key.
3 The display shows 12-00 AL1.
4 Activate the alarm using the Up key ▲ or the Down key ▼ - an
activated alarm is indicated with ALM on the right hand side of the time
display.
5 Press the Set key, the hours will flash.
36