OTHER SETTINGS
6.6
SETTING THE PIN CODE
The PIN code is used for resetting the tariff and is set in the factory to the value "0 0 0 0".
If you ever want to change the preset PIN code, proceed as follows:
A. Please follow the instructions:
Menü
Press the
button once.
Turn the Jog dial until the "Gebührenkonto" message appears in
the display.
Ja
Confirm with
Turn the Jog dial until the "Code eingeben:" message appears
in the display and confirm with
Now enter the old PIN code (factory setting 0 0 0 0) and confirm
Ja
with
. If the PIN code is incorrect, the display shows
"Abgelehnt".
Now enter the new four-digit code.
Confirm with the
Enter the new four-digit code once more as a check.
Ja
Press the
button to save.
Nein
Press the
button twice to exit programming
WARNING! Please make a note of the PIN code you have entered.
If you ever forget the code, this can be reset to the factory setting "0 0 0 0" by a trained
specialist. In this case, please contact our Service Hotline 0180 5 00 13 88.
62
.
Ja
.
Ja
button.
AUDIOLINE TELEPHONE 300G
Display shows:
Hinzufügen
Gebührenkonto
Gesamtgebühr
Code eingeben:
Neuer Code:
Neuer Code: ****
Wiederholen:
Wiederholen:****
Gespeichert => Code
eingeben: