Herunterladen Diese Seite drucken

Troubleshooting - Xenteq LBC 500XTR Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für LBC 500XTR:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
O V E R V I E W ( C H A R G E ) S T A T U S
With the 'charging process' LED's and the ' power' LED the status of the battery
charger can be followed.
Charge process:
Red
Yellow
Yellow, flashes
Green
Green, flashes
T R O U B L E S H O O T I N G
Problem
The battery is connected to
the charger and the charger
does not work. No LED's
burn.
Charger is in its bulk stage
(LED red), but the charge
current is not 100%.
The battery isn't charged
fully, but the charger
indicates the charging
process is finished.
19
Bulk stage
Equalize stage
Compensation
charging*
Float stage
Jogging
(Possible) cause
No input voltage present.
Input fuse broken.
Charger feels hot. Internal
temperature too high.
Charger has reduced the
charge current.
Battery doesn't absorb any
current.
The battery is sulphated.
Power:
Green
Flashes two times
every 10 seconds
Red
*
= optional stage
**
= advise the trouble shooter
Action
Check the mains voltage.
Replace the fuse or return the
charger to the retailer/
manufacturer
When the charger has cooled
down enough, the charge
current will be corrected.
Battery sulvated. Check the
battery.
Battery was already full when
the charger was activated.
Charger will switch soon to the
next stage (LED yellow).
Check the battery.
Charger activated
Charger de-activated
(standby mode)
Problem detected**

Werbung

loading