Herunterladen Diese Seite drucken

Xenteq LBC 500XTR Gebrauchsanweisung Seite 15

Vorschau ausblenden Andere Handbücher für LBC 500XTR:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EN
S E T T I N G T H E C H A R G E R
The LBC 500XTR has different charging voltages because each battery type needs
other voltages to ensure the longest duration of life. Therefore, the right charging
voltages need to be set beforehand by means of the 'power/mode' button.
Compensation charge
For lead-acid batteries that will be heavily discharged on a regular base, an extra
charge phase can be activated. During his phase the charge voltage will increased to,
depending on the charge program, 15Vdc to 16Vdc (x2 at 24V. chargers). Because of
this high charge voltage, this phase may only be activated when there are no users
present during charging. Attention: always check if the concerning battery may
endure this extra phase. For example, for many closed maintenance free batteries
this phase isn't suitable.
Setting procedure
The battery may be connected, but is not required.
Connect the charger to the mains. Push directly afterwards, within 5 seconds, on the
'power/mode' button shortly. The green 'Power' LED starts flashing, which means that
the charger is in its setup-mode. By way of pressing the button you now can choose
between the 'setting' LED's. Each different LED combination stands for a voltage
setting. For the voltages, see page 36. The schedule below is a directive. Always
check if the recommended charging voltages match with the charging guides of your
battery. If necessary, choose a setting that suits better for the concerning battery.
Most of all AGM batteries have a large diversity of charge voltages, so for this type of
battery it is even more important that the advised charge voltages are verified.
Never set the charger to your own opinion. This can lead to irreparable damage to the
battery.
Important
The charger can only run the set-up mode after connection with the mains. So when
the charger for instance is reactivated from its stand-by mode, it can't be set.
BATTERY TYPE
START, WET *
START, WET
WITH COMPENSATION CHARGE
OPEN SEMI-TRACTION, TRACTION
15
SUGGESTED SETTING
*
1 2 3 4
1 2 3 4
1 2 3 4
(flashing)

Werbung

loading