Herunterladen Diese Seite drucken

Xenteq LBC 500XTR Gebrauchsanweisung Seite 14

Vorschau ausblenden Andere Handbücher für LBC 500XTR:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

secure the correct working of the voltage compensation, it is preferred not to change
the length of the cables.
Current limitation
The charger incorporates a current limitation feature.
Charge time monitoring
All phases of the charge process are time monitored, but in particular the first stage,
the boost phase. If this phase takes longer than 14 hour, the charge process will be
stopped and the ' power'
feature is that this way is prevented that the charger keeps on charging a broken
battery. But with this feature it also can become clear that the
charger doesn't fit the specific situation. For instance that the charge current isn't in
the correct proportion to the battery capacity (the battery can become damaged when
the charge process takes too long) or due to the presence of users there is insufficient
current left for charging the battery.
Battery voltage protection
After switching on, the charger first monitors the battery voltage. If the charger
doesn't detect a battery, the power led will light up red. If the charger measures a
battery voltage that is too low, so the battery is discharged too deeply, the power led
will light up red for 3 minutes as a warning. The charging process will not start when
the battery voltage is too high. Then the power led will also light up red.
Level of protection
The indication for the degree of protection contains the character 'IP' (International
Protection) followed by two or three digits that stipulates the conditions that it
complies with.
The first digit refers to the class of protection for density and the second digit to the
fluid density. The LBC 500XTR can be assigned IP 66, which means:
6 = dust tight
6 = protected against water jets from any direction
Important
Do not expose the charger to water under high pressure, for instance during cleaning
activities with a pressure washer. This can damage the charger internally. The repair
cost are not covered by warranty.
LED will light up red.
Most important requisite of this
EN
14

Werbung

loading