Installation Instructions - Heatscope MHS-SM1600 Gebrauchsanleitung

M U N I C H H O M E S Y S T E M S
Unpacking the unit / packaging
Unpack the unit and the accessories carefully. When opening the packaging, do not use sharp objects
that could damage the unit.
This product comes supplied in environmentally friendly packaging. All HEATSCOPE® packaging that
comes into circulation either directly or via the trade is certified in accordance with §6 of the German
Packaging Directive. As a result, all HEATSCOPE® packaging can be disposed of in an environmentally
friendly manner in collection containers for packaging materials. The relevant legal regulations must be
observed here. Further information is available from the manufacturer.
Care information! Important! Clean the unit with a damp cloth before using it for the first time. Do not
use cleaning products containing alkaline substances such as sodium hydroxide or soap, surfactants or
solvents/alcohol.

Installation instructions

The INDIVIDUAL options for installing the HEATSCOPE® radiant heater are shown in the diagrams in the
beginning of this manual.
Ensure that the radiant heater is fixed securely to the installation surface. In terms of tensile and shear
strength, the fixings must be able to withstand at least 3 times the weight of the radiant heater (in-
cluding accessories) that is to be installed. When installing the unit, use the correct screws (supplied)
for the surface.
Please bear in mind that you always need two fixing brackets to fix your unit safely. Please refer to the
minimum installation dimensions for the unit (cf. „minimum distances").
It is mandatory to install the unit on a surface where it is well protected from any weather influences
like rain and dust from above; so the HEATSCOPE® has to be installed under a roof, an overhang or in
combionation with the optional available weather shield.
Operation, installation instructions and minimum distances
Once you have installed the unit, you can use it for the first time.
The HEATSCOPE® features an omnipolar „ON/OFF" switch. You can control the radiant heater manually
using a selector switch on the unit itself or using an IR remote control which comes supplied (depen-
ding on the model). The unit must be connected to a residual current circuit breaker and a fuse!
Install the unit only in indoor or outdoor areas that are well protected from any weather influences
from above like rain and dust. The heater is protected from lateral spray water, but it has to be covered
with a roof or a similar canopy like the optional available weather shield upwards.
CAUTION: The mounting of the heater on the wall and on the cieling as well as in glass houses and
conservatories has professionally to be accomplished solely according to the mounting regulations.
Specified safety distances given are min. values and may deviate from the local building and fire
safety regulations. The safety distances as well as the local building and fire safety regulations must be
complied with at all times, leave inproper stated installation settings undone at any time. Deviant ins-
tallation settings require the technical approval of the manufacturer, who can prescribe the installation
EN
MHS Munich Home Systems GmbH · Kramergasse 32 · 82054 Sauerlach · Germany