Restore Factory Settings - HomeMatic HmIP-PMFS Montage- Und Bedienungsanleitung

Restore factory settings

1x long red
lighting
6x long red
flashing
1x orange
and 1 x green
lighting (after
plugging into a
socket)
9 Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the pluggable switch,
please proceed as follows:
• Unplug the device from the socket (see figure 2).
34
Duty cycle
exceeded or
transmission
failed
Device defec-
tive
Test display
Please try again
(see "8.1 Com-
mand not con-
firmed" on page
32 or "8.2 Duty
cycle" on page
32).
Please see your
app for error mes-
sage or contact
your retailer.
Once the test dis-
play has stopped,
you can continue.