Restore Factory Settings - Homematic Hm-Sec-Sco Betriebsanleitung

Restore factory settings

Flashing code
Slow red flashing
Fast red flashing
7 Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the door/window sen-
sor, please proceed as follows:
• Press the teach-in button (G) for at least 5 seconds
using a pointed object. The LED will start to flash
red slowly.
Restore factory settings
Meaning
Stage before resetting to
factory settings (device is
waiting for teach-in button to
be pressed and held in order
to carry out a reset, or for a
short button press to cancel
the process)
Sensor is being reset to the
initial state
55