Technical Data; Safety Instructions - Klarstein 10031084 Anleitung

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Technical Data 11
Safety Instructions 11
Product Description and Accessory 12
Installation 13
Remote Control and Receiver 16
Frequency Settings 17
Wiring Diagram 17
Fuse Replacement 19
Troubleshooting 19
Hints on Disposal 19
Declaration of Conformity 19
Item number
Power supply
• Installation must be carried out by a qualified electrician.
• Turn off the electrical mains at the circuit breaker/fuse box.
• Do not use power supply other than 220V~240V ~ 50-60Hz.
• This appliance must be earthed.
• When mounting the fan, ensure that the safety wire is looped across the mounting bracket.
• The mounting bracket must be able to withhold a min. weight of 35 pounds.
• The ceiling fan must be mounted at a min. height of 7.5 feet / 2.3 m of clearance from the floor.
• Do not place any objects in the path of the blades.
• When all electrical connections are done, store all wires neatly.
• Make sure that all screws and connections are tightly screwed and secured.
ATTENTION: This product is designed to use only those parts supplied with this product and/or accessories
designated specifically for using with this product. Using parts and/or accessories not designated
for using with this product could result in personal injury or property damage.
11
Contents

Technical Data

10031084
220-240 V ~ 50-60 Hz

Safety Instructions