Product Description And Accessory - Klarstein 10031084 Anleitung

Product Description and Accessory

Equipment Parts
A Mounting Bracket
B Downrod Set
C Canopy
D Fan Body
E 40W Circular Lamp
Needed Tools
• Philips Screwdriver
• Slotted Screwdriver
• Adjustable wrench
• Cutter
• Ladder
Important Hints
The transmitter is designed for use with either wall bracket for transmitter (d) or the transmitter cover (b). Place
the parts from (g) shown above, in a small container to prevent parts from getting lost. If any parts are missing,
contact your local retailer for replacement before proceeding.
Remote Control
a Transmitter
b Transmitter Cover
c Receiver
d Wall bracket For Transmitter
e Battery
f Manual For Remote Control
g Accessories Packet
Accessories Packet
h Expansion Screws x2 (Optional)
i Screws For Mounting Bracket x2
j Clasp x1 (Optional)
k 6mm Hex Wrench
l 4mm Hex Wrench
m Wire Connector x3
n Balance Pack x1
12