Victron energy Phoenix Multi 12/2000/100 Installationsanleitung Seite 9

2.3 Changing settings with the push buttons and dipswitches
2.3.1 Activate Set-up
DS-8 on DS-8
DS-7 DS-7
DS-6 DS-6
DS-5 DS-5
DS-4 DS-4
DS-3 DS-3
DS-2 DS-2
DS-1 DS-1
Activate set-up with Select a setting using
DS8 switched to On DS3 - DS7 and set
the new value using
the pushbuttons.
DS-1 and DS-2 are not used and must be switched to Off.
NOTE: The new value is stored by changing the position of one of the switches DS3-DS7.
The new value is NOT stored if set-up is closed without changing the position of one of the
switches DS3-DS7. This offers an escape route if the change is not to be implemented.
DS-8 DS-8
DS-7 DS-7
DS-6 DS-6
DS-5 DS-5
DS-4 DS-4
DS-3 DS-3
DS-2 DS-2
DS-1 DS-1
Store the settings by Close set-up by
changing the position switching DS8 to Off
of one of the
switches DS3-DS7
off
7