Inhaltsverzeichnis
Werbung
6.1 Introduction
The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to
certain system settings. This chapter outlines the options that can be changed.
6.1.1 Starting Setup
The AMI BIOS is activated when the computer is turned on. The setup program can be
activated in one of two ways.
1. Press the D
2. Press the D
appears on the screen.
If the message disappears before the D
again.
6.1.2 Using Setup
Use the arrow keys to highlight items, press E
PageDown keys to change entries, press F1 for help and press E
keys are shown in.
Key
Function
Up arrow
Move to previous item
Down arrow
Move to next item
Left arrow
Move to the item on the left hand side
Right arrow
Move to the item on the right hand side
Esc key
Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu --
Exit current page and return to Main Menu
Page Up key
Increase the numeric value or make changes
Page Dn key
Decrease the numeric value or make changes
F1 key
General help, only for Status Page Setup Menu and Option
Page Setup Menu
Page 74
key as soon as the system is turned on or
ELETE
key when the "Press Del to enter SETUP" message
ELETE
0.
key is pressed, restart the computer and try
ELETE
IQ7 Design Guide
to select, use the PageUp and
NTER
to quit. Navigation
SC
Werbung
Inhaltsverzeichnis
