2.1 Peripheral Interface Connectors
This chapter gives an overview of all the connectors on the IQ7-US15W and their pin
definitions.
2.2 Layout
F igure 2-1 shows the on-board peripheral connectors, rear panel peripheral connectors
5
and on-board jumpers.
Figure 2-1: Connector and Jumper Locations
2.3 Connector Pinouts
Table 2-1 shows a list of the peripheral interface connectors on the IQ7-US15W. Detailed
descriptions of these connectors can be found below.
Connector
QSeven Connector
IDE Connector
Table 2-1: Peripheral Interface Connectors
Page 8
Type
Label
QSeven connector
J1
Flat cable
CN16
IQ7 Design Guide