IEI Technology IQ7-US15W Bedienungsanleitung Seite 101

IQ7 Design Guide
Thermal Mode
Manual Mode
TargetTemp [030]
WARNING:
CPU failure can result if this value is set too high
The fan will turn off if the temperature falls below this value.
Minimum Value: 0°C
Maximum Value: 127°C
Tolerance Value [05]
This options sets how fine the jumps in fan speed are. If the setting is low, the fan will
change speed in small increments, if the value is larger it will change speed in big
amounts.
Min: 0
Max: 15
The fan adjusts its speed using these
settings:
TargetTemp Value
Tolerance Value
Startup Value
Stop Value
StopTime Value
D The fan spins at the set speed, max speed is
EFAULT
at 255, full-off is at 0.
Page 89