Inhaltsverzeichnis
Werbung
6.3.5.1 AHCI Port n
Use the AHCI Port n configuration menu (BIOS Menu 9) to configure the drive connected
to SATA connector n.
Main
Advanced
PCIPNP
AHCI Port0
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Device
:Not Detected
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
SATA Port0
S.M.A.R.T.
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 9: AHCI Port n Configuration Menu
SATA Port n [Auto]
Use the SATA Port n option to enable the system to auto-detect the type of drive
connected to SATA drive connector n.
S.M.A.R.T [Enabled]
Use the S.M.A.R.T option to enable S.M.A.R.T (Self-Monitoring, Analysis, and Reporting
Technology) on the drive connected to SATA drive connector n.
Enabled
Disabled
Page 92
BIOS SETUP UTILITY
Boot
Security
[Auto]
[Enabled]
S.M.A.R.T is enabled on the drive connected to SATA
D
EFAULT
drive connector n on the system
S.M.A.R.T is disabled on the drive connected to SATA
drive connector n on the system
IQ7 Design Guide
Chipset
Exit
Select the type of device
connected to the system
Select Screen
↑ ↓
Select Item
Enter Go to SubScreen
F1
General Help
F10
Save and Exit
ESC
Exit
Werbung
Inhaltsverzeichnis
