Care Instructions For Stainless Steel Surfaces; Operating Noises; Normal Noises; Avoiding Noises - Gaggenau RW 424 Gebrauchs- Und Montageanleitung

4. Clean the glass door with a commercially available
glass cleaner and a soft cloth.
5. Only clean the door seal with clean water, and rub it
dry thoroughly.
6. Remove dirt on ventilation openings using a vacuum
cleaner.
7. Remove deposits in the drainage opening using a
thin device e.g. a cotton bud.
8. After cleaning: Plug the appliance into the mains or
switch on the fuse.
Care instructions for stainless steel
surfaces
Use Chromol" cleaning agent for cleaning stainless
steel surfaces.
This cleaning agent is available on the market under the
name Chromol" or from your after−sales service under
ID No. 310359 as 500 ml aerosol can and
ID No. 166787 as 50 ml sample bottle.
To prevent damage to the surfaces, under no
circumstances use abrasive sponges, metal brushes,
sharp−edged implements or scouring agents.
Chemically aggressive cleaning agents such as
defrosting spray, oven spray, solvents or stain removers
must not be used either.
36

Operating noises

Normal noises

Humming − the refrigeration unit is running. The
circulation fan is running.
Bubbling, whirring or gurgling noises − refrigerant is
flowing through the pipes.
Clicking − refrigeration unit (motor) is switching on or off.

Avoiding noises

The appliance is positioned unevenly
Align the appliance using a spirit level (see "Installing the
appliance").
Pull−out bottle racks are wobbling or sticking
Check the removable pull−out bottle racks and replace
them if necessary.
Containers are touching
Move bottles or containers apart slightly.