Gaggenau RW 424 Gebrauchs- Und Montageanleitung Seite 29

12. Align the appliance using the adjustable foot on the
door opening side:
The mounting angle must be flush with the front
edge of the kitchen unit floor.
The distance (x) between the front edge of the
kitchen unit wall and the front edge of the appliance
must be the same all the way around.
The side of the upper hinge must rest against the
wall of the kitchen unit.
Note!
The spanner for making the adjustments is included
with the appliance.
13. Fasten the upper hinge to the wall of the kitchen
unit using 1 screw (4 x 29 mm from the accessories
kit).
14. Fasten the lower hinge to the floor of the kitchen
unit using 2 screws (4 x 19 mm from the
accessories kit).
15. Fasten the mounting angle to the floor of the kitchen
unit using 2 screws (4 x 19 mm from the
accessories kit) and close.
16. Fasten the compensating panel to the ceiling of the
kitchen unit using 2 screws (4 x 14 mm from the
accessories kit).
Note!
Remove the protective film before mounting the
handle.
The top and bottom centre−punched markings on
the appliance door are not for mounting the handle.
17. Fasten the handle by screwing 2 screws
(3.5 x 9.5 mm from the accessories kit) through the
centre−punched markings on the appliance door.
Apply more pressure to the screws in order to pierce
the metal sheet.
29