Interior Lighting, Led - Gaggenau RW 424 Gebrauchs- Und Montageanleitung

3. Press the fan button. The current value for the
illuminating power flashes in the display.
3.
4. Adjust the illuminating power in the display using the
plus or minus button:
h1": Minimum illumination power
to
h5": Maximum illumination power.
5. Press the fan button to confirm the flashing value.
6. 5.
6. After the display changes, press the on/off button to
exit the adjustment mode and close the door.
After approx. 1 minute, the light changes to the
brightness you have set.

Interior lighting, LED

Both the upper and lower compartments have
integrated, maintenance−free LED lighting with dimmer
effect.
When the door is opened, the brightness slowly
increases from 0 to the individually−controlled maximum
luminosity. Closing the door has the reverse effect.
4.
Making individual adjustments to the maximum
luminosity.
1. Press the interior lighting button.
2. Press and hold the interior lighting button and adjust
the luminosity using the plus or minus button:
Plus button:
Minus button:
The interior lighting can also be switched on
permanently for presentation purposes:
D
Press the interior lighting button.
D
To switch off the permanent light, press the interior
lighting button again.
Caution. LED lighting
Laser radiation, class 1M (standard IEC 60825). Do
not look directly into the laser beam with optical
instruments. Risk of eye damage! Repairs to the
laser equipment must only be carried out by the
after−sales service or authorised specialists.
brighter
darker.
33