7. Screw the espresso pot onto the water reservoir.
9. Connect the base station to a plug socket that has been properly installed.
5. Insert the funnel-shaped sieve insert back into the water
reservoir.
6a. If you want to brew 6 cups of espresso, fi ll the funnel-
shaped sieve insert up to its edge with espresso powder
and smooth down the fi lled powder and remove any
excess espresso powder.
IMPORTANT: Only smooth down the powder. DO
NOT COMPRESS IT!
6b. If you want to brew 3 cups of espresso, insert the inter-
mediate sieve into the sieve insert.
Then fi ll the intermediate sieve up to the edge with es-
presso powder and smooth down the fi lled powder and
remove excess espresso powder.
IMPORTANT: Only smooth down the espresso pow-
der. DO NOT COMPRESS IT!
8. Place the espresso maker onto the electric base station.
Make sure that the lid of the espresso pot is closed.
18