Causes And Rectification Of Faults - Caso Master E2 Originalbetriebsanleitung

17.2 Causes and rectification of faults

caso Master E2
In the event of a fault, an error code will appear in the display; it
describes the cause of the fault.
The following table assists in localizing and rectifying minor
faults.
Fault Possible Cause
Abnormal supply
voltage.
E1/E2
Abnormal
E3/E4
temperature
Bad hotplate heat
E5/E6
radiation
Fan failure
F0/F1/F2
F3-F8 Thermostat failure
Temperature sensor
F9-FE
failure
Please note
► If error messages continue to be displayed after an extended
waiting period or after restarting the appliance, then it must be
sent to Customer Service to be examined.
► If you are unable to solve the problem with the steps shown
above, please contact Customer Service.
Cleaning and Maintenance
To Rectify
► Make sure the appliance
is connected to the
voltage indicated
► Please inspect the pot
► Please restart after
hotplate has cooled down
► Please send back to
customer serivce.
► Please restart after
hotplate has cooled
down.
► Please restart after
hotplate has cooled
down.
62