Troubleshooting; Safety Notices; Causes And Rectification Of Faults - Caso Inno Slide 2100 Bedienunganleitung

18 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

18.1 Safety notices

Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and damages
to the device.

18.2 Causes and rectification of faults

In the event of a fault, an error code will appear in the display; it describes the cause
of the fault.
The following table assists in localizing and rectifying minor faults.
Fault To Rectify
E1 E2 E4 E5
Please send the device to customer service.
Eb
E3 E6
Let the device cool down. Switch off and on the device to reset the fault.
E7 E8
Please note
► If error messages continue to be displayed after an extended waiting period or after
restarting the appliance, then it must be sent to Customer Service to be examined.
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials.
However, they also contain damaging substances, which were necessary for
their functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they
could be detrimental to human health and the environment. Therefore, do not put your old
device into the non-recyclable waste under any circumstances.
Please note
Utilise the collection point, established in your town, to return and recycle old electric and
►
electronic devices. If necessary, contact your town hall, local refuse collection service or
your dealer for information.
Ensure that your old device is stored safely away from children until it is taken away.
►
caso Inno Slide 2100 48