Recording - Yamaha RX-V757 Bedienungsanleitung

RECORDING

Recording adjustments and other operations are
performed from the recording components. Refer to the
operating instructions for those components.
OPTIMIZER MIC
PRESET/TUNING FM/AM
SEARCH MODE EDIT XIM
PROGRAM
PHONES SPEAKERS
A B
STRAIGHT
STANDBY
/ON
EFFECT
SILENT CINEMA
1
TRANSMIT
SYSTEM
1
POWER
A
V-AUX
DTV/CBL
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
INPUT
Front panel
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
y
Do a test recording before you start an actual recording.
48
A/B/C/D/E l PRESET/TUNING h MEMORY TUNING MODE
CATEGORY NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L MONO DISPLAY
INPUT
TONE CONTROL INPUT MODE MULTI CH PURE DIRECT
INPUT
S VIDEO
2
RE-NAME CLEAR LEARN
STANDBY SLEEP INPUT MODE
B PHONO MULTI CH IN
2
TUNER MD/CD-R CD
VCR 1 DVR/VCR2 DVD
SELECT
A B PHONO
V-AUX TUNER MD/CD-R
or
DTV/CBL VCR 1 DVR/VCR2
Remote control
RECORDING
Notes
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, "SPEAKER
LEVEL" (page 59) and programs does not affect recorded
material.
VOLUME
• A source connected to the MULTI CH INPUT jacks of this unit
cannot be recorded.
• S-video and composite video signals pass independently
VIDEO AUX
VIDEO L AUDIO R OPTICAL
through this unit's video circuits. Therefore, when recording or
dubbing video signals, if your video source component is
connected to provide only an S-video (or only a composite
video) signal, you can record only an S-video (or only a
composite video) signal to your VCR.
• Digital signals input to the DIGITAL INPUT jacks are not
output to the analog AUDIO OUT (L/R) jacks for recording.
Likewise, analog signals input to the AUDIO IN (L/R) jacks are
not output to the DIGITAL OUTPUT jack. Therefore, if your
source component is connected to provide only digital (or
analog) signals, you can only record digital (or analog) signals.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR 1 IN is not
output on VCR 1 OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material may
infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
MULTI CH IN
■ Special considerations when recording
CD DTS software
The DTS signal is a digital bitstream. Attempting to
DVD
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For DVDs and CDs encoded with DTS, when your player
is compatible with the DTS format, follow its operating
instructions to make a setting so that the analog signal will
be output from the player.