Yamaha RX-V757 Bedienungsanleitung Seite 16

SPEAKER SETUP
■ FRONT terminals
Connect one or two speaker systems (6, 7) to these
terminals. If you use only one speaker system, connect it
to the FRONT A or B terminals.
■ CENTER terminals
Connect a center speaker (8) to these terminals.
■ SURROUND terminals
Connect surround speakers (4, 5) to these terminals.
■ SUBWOOFER jack
Connect a subwoofer with built-in amplifier (1), such as
the YAMAHA Active Servo Processing Subwoofer
System, to this jack.
■ SURROUND BACK terminals
Connect surround back speakers (9, 10) to these terminals.
If you only connect one surround back speaker, connect it
to the left (L) terminals.
■ PRESENCE terminals
Connect presence speakers (2, 3) to these terminals.
*
If you are using RX-V757, you can also use these speakers as
Zone 2 speakers (see page 65).
14
2
3
6
8
7
5
Speaker layout
1
4
9
10