Recording - Yamaha RX-V457 Bedienungsanleitung

RECORDING

Recording adjustments and other operations are
performed from the recording components. Refer to the
operating instructions for those components.
STANDBY
/ON
PRESET/TUNING FM/AM A/B/C/D/E
EDIT
STRAIGHT l PROGRAM
PHONES SPEAKERS
A B
EFFECT
TONE CONTROL BASS/TREBLE
SILENT CINEMA
1
POWER
TV
CD
2
DVD
REC
DISC SKIP
FREQ/TEXT
MODE
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
INPUT
or
Front panel
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
y
Do a test recording before you start an actual recording.
42
RECORDING
VOLUME
l PRESET/TUNING h
MEMORY TUNING MODE
NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L MONO
INPUT
h
VIDEO AUX
INPUT MODE MULTI CH
INPUT
VIDEO L AUDIO
2
SYSTEM
POWER STANDBY POWER
1
AV
MD/CD-R TUNER SLEEP
DTV/CBL VCR V-AUX
MULTI CH IN
AUDIO
CODE SET
EON
AMP
PTY SEEK START
CD MD/CD-R TUNER SLEEP
DVD DTV/CBL VCR V-AUX
MULTI CH IN
REC
AUDIO
DISC SKIP
CODE SET
Remote control
Notes
• When this unit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, "SP LEVEL"
(page 51) and the sound field programs does not affect recorded
material.
• A source connected to the MULTI CH INPUT jacks of this unit
cannot be recorded.
• S-video and composite video signals pass independently
through this unit's video circuits. Therefore, when recording or
R
dubbing video signals, if your video source component is
connected to provide only an S-video (or only a composite
video) signal, you can record only an S-video (or only a
composite video) signal to your VCR.
• Digital signals input to the DIGITAL INPUT jacks are not
output to the analog AUDIO OUT (L/R) jacks for recording.
You can only record analog signals.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR IN is not
output on VCR OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material may
infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
Special considerations when recording
DTS software
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For DVDs and CDs encoded with DTS, when your player
is compatible with the DTS format, follow its operating
instructions to make a setting so that the analog signal will
be output from the player.