Starting The Setup - Yamaha RX-V757 Bedienungsanleitung

Starting the setup

For best results, make sure the room is as quiet as possible
during the auto setup procedure (YPAO). If there is too
much ambient noise, the results may not be satisfactory.
y
If your subwoofer has adjustable volume and crossover/high cut
frequency controls, set the volume between 9 and 11 o'clock (as
viewed on a conventional clockface) and set the crossover/high
cut frequency to the maximum.
VOLUME
MIN MAX
Subwoofer
1
Switch on this unit and your video monitor.
Make sure the OSD is displayed.
2
Press AMP.
3
Press SET MENU.
y
When MEMORY GUARD is set to ON, you cannot select
any other SET MENU items (see page 60).
4
Press u / d to select AUTO SETUP, then
press ENTER.
PRESET
TV VOL
CH CH
TV MUTE
ENTER
TV VOL
PRESET
CROSSOVER/
HIGH CUT
MIN MAX
AMP
SET MENU
MENU
SRCH MODE
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
;SIGNAL INFO.
[ ]/[ ]:Up/Down
[ENTER]:Enter
PRESET
TV VOL
CH CH
TV MUTE
ENTER
TV VOL
PRESET
5
Press u / d to select SETUP, then press j / i
to select the desired setting.
1 AUTO:MENU
. SETUP;;;;;;;AUTO
START
Automatic
processing
of all items
[ ]/[ ]:Up/Down
[<]/[>]:Select
AUTO
To perform the auto setup procedure
(YPAO).
RELOAD
To reload the last auto setup (YPAO)
settings to override any manual
changes.
UNDO
To undo the last auto setup (YPAO) and
restore the previous settings.
DEFAULT
To restore the factory preset (default)
setup parameters.
y
You can choose RELOAD or UNDO only if you have
already performed the auto setup procedure.
6
Press d to select "START", then press
ENTER to start the setup procedure.
The screen changes as follows.
1 AUTO:MENU
SETUP;;; ;;;;;;;
. START
Automatic
processing
of all items
[ ]/[ ]:Up/Down
[ENTER]:Start
2 AUTO:CHECK
INITIALZING
.
WIRING
. SIZE/DISTANCE
. EQUALIZING
. LEVEL
CHECK CH=CENTER
|||||;;;;;;;;
[ ]: Exit
RESULT:EXIT
. WARNING (3)
RESULT
SP
DIST: 10.0/ 12.0ft
LVL : -9.0/ +6.5dB
. >SET CANCEL
[ ]/[ ]:Up/Down
[ENTER]:Enter
AUTO SETUP
AUTO
: 5/4/0.1
25