Ironing Without Steam - Silvercrest SDBS 2400 A1 Bedienungsanleitung

NOTE
► Do not tip or swivel the steam station when the water tank
do, water may be discharged from the filler opening.
5) Insert the plug into a mains power socket.

Ironing without steam

NOTE
Always set the temperature control
the appliance on. The symbols on the temperature control
the following settings:
1) Press the On/Off button
integrated in the On/Off button
lamp
2) Rotate the temperature control
3) The heat-up indicator lamp
up indicator lamp
you can start ironing.
4) Put the iron down on the base station placement area
the temperature control
5) Press the On/Off button
integrated in the On/Off button
go out.
6) Pull out the plug from the mains socket.
■ 12 │ GB │ IE │ NI
Symbol
min -
( - max)
flashes.
goes out, the set temperature has been reached and
to "min".
to turn the appliance off. The indicator lamp
to the lowest level (min) before switching
Temperature
Material
Synthetics
Silk
Wool
Cotton/linen
to turn the appliance on. The indicator lamp
lights up and the "max" steam indicator
to set the required ironing temperature.
lights up during heating. As soon as the heat-
and the "max" steam indicator lamp
is full. If you
correspond to
(approx.)
70 - 120 °C
70 - 120 °C
100 - 160 °C
140 - 210 °C
after ironing. Set
SDBS 2400 A1