Handling And Use; Before First Use; Filling The Water Tank - Silvercrest SDBS 2400 A1 Bedienungsanleitung

Handling and use

This section provides you with important information on handling and using the
appliance.
Before first use
♦ Clean the sole of the iron
♦ To remove any leftover production residues, iron an old, clean cloth a few
times.

Filling the water tank

NOTE
Use only tap water or distilled water.
If the mains water in your location is rated as hard, it is recommended that you
mix the mains water with some distilled water. Otherwise limescale deposits
can adversely affect the appliance functions.
Mix the tap water with distilled water in accordance with the following table:
Do not add water with any additives (such as starch, perfume, softeners or
other chemicals) to the water tank
since residues can form in the steam chamber. These residues can soil the
goods being ironed if they are deposited through the steam openings.
1) Remove the power plug from the mains power socket if the appliance is
plugged in.
2) Open the water tank filler cap
This is marked with the symbol:
3) Fill the water tank
4) Close the water tank filler cap
SDBS 2400 A1
using a slightly moist cloth.
Water hardness
very soft/soft
medium
hard
very hard
. Do not fill above the MAX marking in the water tank
Ratio of distilled water to
tap water
-
1:1
2:1
3:1
. The appliance could be damaged,
.
.
.
GB │ IE │ NI
.
11 ■
│