Reset Videomode Table; Remote Video - Guntermann & Drunck LwLVision-Rem Installation Und Bedienung

Guntermann & Drunck GmbH
Info
This function will delete
Press Enter to continue
Confirm again with ENTER. The window will change to the menu FUNCTION.

7.2.3.3.4 Reset Videomode table

If you manually change the settings calculated from the system in the menu
Image Config by

activating a new automatic adjustment (Automatic Adjust)

an adjustment of further parameters (e.g. X Pos, Y Pos. etc.)
these settings are stored in the LwLVision-PC.
Through Reset Videomode table all settings are deleted irrevocably.

7.2.3.3.5 Remote Video

With this setting you define whether the monitor of the remote console at
keyboard or mouse action will

permanently be switched on or

be switched dark.
The following possibilities are available:

ON:

Switch off: Monitor will be switched dark at keyboard or mouse action
In order to save the settings and close this menu, press F1.
You can always close this menu with ESC.
all settings.
or
Esc to cancel
Monitor stays permanently switched on
of the local console
Page 39
Operating Instructions LwLVision
L W L M