Activation Of The Channel Display; Setting Of The Display Position - Guntermann & Drunck LwLVision-Rem Installation Und Bedienung

Guntermann & Drunck GmbH

7.2.2.4 Activation of the Channel Display

With this you have the possibility to set the display for the selected computer to

constant => Yes

temporary => No
After you have moved the cursor to the array
wanted option through
In order to save the settings and close this menu, press F1.
If you have selected the temporary channel display you can always call up the
display of the selected channel with

7.2.2.5 Setting of the Display Position

With this you change position of the channel display on the monitor. Move the
cursor to the corresponding entry in the menu CONSOLE SETUP.
By pressing ENTER
position through the arrow control keys or by means of the mouse.
+
DISPLAY-POSITION
With ENTER you save all settings and go back to CONSOLE SETUP
(temporary stored).
In order to save the settings and close CONSOLE SETUP, press
(permanently stored).
or
(disappears approx 5 seconds after switching).
SPACE (toggle) or
CTRL
you will get in the edit mode and can change the display
Page 27
Operating Instructions LwLVision
DISPLAY you can select the
Y + N.
+ CAPS LOCK.
F1