Image Config; Console Setup; Settings Of The Screensaver - Guntermann & Drunck LwLVision-Rem Installation Und Bedienung

Guntermann & Drunck GmbH
7.2.1

Image Config

See chapter 6.3.1
7.2.2

Console Setup

By pressing F3 in the Function menu you will get to the Console Setup.
C O N S O L E S E T U P
Screen Saver:
AutoLogout:
Console Name:
Display:
Display Position
Menu Position
AdonIS by Mouse:
Keyboard Layout:
Esc

7.2.2.1 Settings of the ScreenSaver

The ScreenSaver to be set here is generated from LwLVision and has no
connection to the ScreenSaver of the computer.
As there is an indirect connection (via LwLVision) between a computer and a
monitor you should switch off the ScreenSaver of the computer for making
work easier.
The ScreenSaver of LwLVision takes over this task; it sets the monitor to the
power-down mode.
Move the cursor to the line ScreenSaver. The current entry can be overwritten
or edited after having pressed ENTER.
Valid is a time between 1 and 60 minutes. The entry "0" sets the ScreenSaver
to "OFF".
With ENTER you close the entry.
In order to save the settings, close the menu with F1.
Operating Instructions LwLVision
Enter
Page 25
L W L M
OFF
OFF
LWLM
NO
NO
German
F1:Save