i
Follow these instructions carefully please, and your pull-up bar will be ready for trai-
ning within about just 5 minutes.
Prior to installation, look for a suitable stable doorframe.
Solid walls made of bricks, stone or concrete, or solid wood doorframes, are resilient and provide
the KS200 with a very good support. Such walls are generally perfectly suited for attaching a pull-up
bar and the associated brackets.
Lighter building materials, such as highly porous brick or aerated concrete, are not suitable. These
would not stand the load, and the brackets would rip out.
Before use, you should carefully clean your door frame with a dry cloth without using detergents.
Step 1
Position the device horizontally and at the desired height level, with a small distance
between the device and the doorframe.
3. ASSEMBLY INSTRUCTIONS
18