Kessel Aqualift S KTP 500 Anleitung Seite 27

seal flange integrated on the body, and scr-
ewed together using the enclosed screws.
Any sheeting used on site can be used as
seal sheeting. For installation in waterproof
concrete (white tub), KESSEL also has mat-
ching seal sheeting available made of natu-
ral rubber NK/SBR, where the bore holes
for the screws have already been cut out
(art. no. 83023, see Fig. 7). Maximum gro-
undwater resistance is 2 m.
Moving the sealing level into the upper
cover section requires a modified set-up
where the KESSEL chamber system LW
400 is used (see Fig. 9).
The individual parts required are shown in
the current KESSEL sales documentation.
If it is necessary to perforate the waterproof
concrete tub to connect feed pipes, cable
conduits etc., these holes must also be set
up waterproof.
2. Installation
The included gasket should be placed into the
recessed area of the housing (as shown in illust-
ration 8) and then the upper portion of this gas-
ket should be lubricated.
Counterflange
Sealing sheet
Fig. 7
27
Seal set
(83023)
Pressdichtungs-
ansch
Compression
Compression seal flange
seal flange
LW 400 (83021)