Work To Be Performed Before Starting Up; Removing The Locomotive From The Packaging - BRAWA G4/5 108 Betriebsanleitung

Work to be performed before starting up

Removing the locomotive from the packaging (Fig. 1)
Open the packaging seal. Take the protective packaging with the
locomotive out of the box and place it on a table or similar.
Caution: Make sure that the wording "TOP" is legible on the top of
the protective packaging. Lift the top off and remove the locomotive
and tender.
Fig. 1
8
G4_5_10000_10001.p65 8 29.09.2005, 14:40