3M PELTOR AVIATION Gebrauchsanleitung Seite 3

(D:3) 8006, 8106 mT51 Electret microphone with carbon converter.
Frequency range:
70–10 000 Hz ± 6 dB
Output signal/sensitivity as lip microphone:
380 mV/220 W
Connection impedance:
150–1000 W
Feed voltage:
7–15 V
Power consumption:
20 mA at 9 V
Noise attenuation:
28 dB at 1 kHz
(D:4) 8103 mT52 Dynamic microphone
Frequency range:
70–9 000 Hz ± 6 dB
Output signal/sensitivity as lip microphone:
≈4 mV/220 W
Impedance:
230 W
Noise attenuation:
12 dB at 1 kHz
(D:5) 8006 HTR-330 Earphone.
Frequency range:
32–16 000 Hz
Impedance:
330 W
Connection parallel:
165 W
Output level at 0.5 V 1 000 Hz:
81.5 dB(A)
(D:6) 8103 HTSU Earphone.
Frequency range:
125–8 000 Hz
Impedance:
32 W
Connection parallel:
16 W
Output level at 0.5 V 1 000 Hz:
89.5 dB(A)
(D:7) 8106 HTS Earphone.
Frequency range:
125–8 000 Hz
Impedance:
230 W
Connection parallel:
115 W
Output level at 0.5 V 1 000 Hz:
81 dB(A)
(E) SPARE PARTS/ACCESSORIES
(E:1) Hygiene kit – HY79
Consists of two attenuating cushions, two foam rings and two sealing rings.
Easy to replace with snap-in attachment. Replace at least twice a year.
(E:2) Clean – single-use protectors – HY100
Single-use protectors for sealing rings. Packages of 100 pairs.
(E:3) mike protector – HYm1000
Effective single-use protection for microphones. One package for approx. 50 replacements.
(E:4) Wind muffler – m57 for dynamic microphone, m995 for electret microphone
An effective wind muffler for microphones. One per package.
Storage bag – FP0901
Comfort headband – HY500
Cord clamp – TKFL01
(G) PELTOR AVIATION mODEL RANGE
8006 – MT51H79F-01 VI
8103 – MT52H79F-03
8106 – MT51H79F-02
READ THE INFORmATION (I) ON THE COVER FLAP!
D:3
D:4
D:5
D:6
D:7
Aviation headset with electret microphone
Helicopter headset with dynamic microphone
Helicopter headset with electret microphone
mT51 mICROPHONE
mT52 mICROPHONE
HTR-330 EARPHONE
HTSU EARPHONE
HTS EARPHONE
weight: 360 g
weight: 370 g
weight: 360 g
GB