AsViva RA8 Benutzerhandbuch Seite 30

ASSEMBLY INSTRUCTIONS
Unscrew 1pcs 1/2*100 screw(42)﹑ 2pcs flat washer OD22*ID13*2.0T(43)﹑ 1pcs 1/2 nylon nut(44) and
1pcs 1/2 nylon nut cover(52) which are premounted on the main frame . connect sensor line upper
section(58) with sensor line below section(59).
Insert seat post(1) into main frame (2),insert main frame pin(55) into main frame and seat post(1),
lock with 1pcs 1/2*100 screw(42)﹑ 2pcs flat washer OD22*ID13*2.0T(43)﹑ 1pcs 1/2 nylon nut(44) and
1pcs 1/2 nylon nut cover(52).
connect seat post and main frame with connection pin(21) , nut M12*1.75 (51) and flat washer
OD32*ID13.5*2.0T(63).
52
44
43
2
58
59
43
42
21
51
63
55
1
STEP 3
30 / 36